TESTO 480 Short Manual page 6

0 Performing a measurement
Saving measuring values from several probes in one protocol
The measuring values of the connected probes are displayed on
the Favourites tab
The grey number above the unit indicates the probe ID, which is
also given in the name of the relevant probe tab.
1. [
- The measuring values are saved together in one protocol.
Changing the measuring value display
The measuring value display can be individually customised on
each tab, e.g.
• Add calculated measurement parameters
• Remove displayed measurement parameters
• Change the unit per measurement parameter
(See testo 480 instruction manual, chapter " Setting the
measurement display ".)
Carrying out a measurement program
With the testo 480, standard measurement programs and special
measurements, e.g. turbulence measurement, can be carried out.
(See testo 480 instruction manual, chapter "Measurement
program".)
=== Ende der Liste für Textmarke Inhalt ===
6
.
] → Quick back-up