Performing A Measurement - TESTO 480 Short Manual

Performing a measurement

All steps for carrying out a sample measurement are set out below.
The individual setting options and a detailed description of the
various measurements can be found in the testo 480 instruction
manual.
Saving current measuring values of a probe
1. On the tab of the relevant probe, select
- The protocol is located under
back-up
If several measurements are saved, the protocols appear
one below the other, sorted according to date.
Protocols can also be saved under a specific measuring
location (client) and measuring point.
(See testo 480 instruction manual, chapter "Saving
measurement data".)
0 Performing a measurement
[ ] →
[ ] → Default point
Quick back-up.
→ Quick
5