Table of Contents
Advertisement
`
Your Smart Energy
Step 3: use the percussion drill (M12 drill) to drill holes in the wall (there are two
methods to position the holes), then install and place the stand. Firstly insert the
expansion pipe into the drilled hole. Then pass the tapping screw through the spacer
and tighten it with the cross screwdriver, as shown in Figure 2.8.
Step 4: install the casing of SMILE-B3 (hold the two arrow positions of B3 and install
the B3 box to the stand) , as shown in Figure 2.9.
___________________________________________________________________
Page 16 of 61
Installation
Figure 2.8 Stand Positioning
Figure 2.9 Casing Fixation
Figure 2.10 Earthing Connectting Position
Alpha ESS Co., Ltd.
Hide quick links:
Advertisement
Table of Contents
