Smile-B3 Installation - Alpha ESS SMILE-B3 Installation & Operation Manual

`
2.4.3 SMILE-B3 Installation
Step 1: Take out SMILE-B3 from the packaging box, as shown in Figure 2.6.
Step 2: Use the T20 double offset ring spanner to unscrew the screws, as shown in
Figure 2.7.
Note: the internal 63A and the external 80A breaker must be in off position to
prevent short circuit.
___________________________________________________________________
Installation
Figure 2.6 Remove SMILE-B3 Packaging
Figure 2.7 Remove SMILE-B3 Upper Cover Plate
Alpha ESS Co., Ltd.
Your Smart Energy
In any case, the first step after
unpacking is to keep
breaker of 63A and 80A in off
position.
the
Page 15 of 61