Electrical Connection - Smeg HOBD682D Manual

Hide thumbs Also See for HOBD682D:
Table of Contents

Advertisement

ELECTRICAL CONNECTION

The wire connection has to be done
Z
X
by specialized technician.
This appliance has a Type "Y"
Z
X
attachment and requires at least a
power supply cord Type H05VV-F.
MONO-PHASE, BI-PHASE and
THREE-PHASE connection: min.
section of the conductors: 2,5 mm².
External diameter of the supply cord:
min. 7 mm - max. 15 mm
Connection terminals are revealed
Z
X
when the connection box cover is
removed.
Make sure the characteristics of the
Z
X
household electrical system (voltage,
maximum power and current) are
compatible with those of the appliance.
30
Connect the appliance like shown in
Z
X
the diagram (in accordance with the
mains voltage and country standard
reference).
We suggest to use power supply cord
Z
X
5 x 2.5 mm² H05V2V2-F. In case
of use of power supply cord 5 x 2,5
mm² H05V2V2-F, below instructions
have to be followed: for three-phase
connection separate the 2 wires and
remove the blue sheaths on grey
wires.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hobd682r

Table of Contents