Smeg HOBD682D Manual page 7

Hide thumbs Also See for HOBD682D:
Table of Contents

Advertisement

can result in warping and
detachment.
The kitchen cabinet must
Z
X
allow sufficient room for the
electrical connections of
the appliance. Suspended
kitchen cabinets above the
appliance must be installed
at a distance that provides
enough room for comfortable
working process.
The use of hard wood
Z
X
decorative borders around
the worktop behind the
appliance is allowed, in this
case the minimum distance
remains as indicated on the
installation illustrations.
The minimum distance
Z
X
between the built-in
appliance and rear wall is
indicated at the illustration
for the installation of the
built-in appliance (150 mm
for the side wall, 40 mm
for the rear and 500 mm
minimum for any cabinets
above it).
To prevent leakage of liquid
Z
X
between the edge of the hob
and the countertop, place
the adhesive seal provided
along the entire outer edge of
the hob before assembly.
Proper use
The extractor appliance has
Z
X
been designed exclusively
for domestic use to eliminate
kitchen smells.
Never use the appliance
Z
X
for purposes other than for
which it has been designed.
Deep fat fryers must be
Z
X
continuously monitored
during use: overheated oil
can burst.
Do not operate the appliance
Z
X
with an external time switch
or a separate remote control
system.
The appliance shall not be
Z
X
installed behind a decorative
door in order to avoid
overheating.
To avoid damaging the
Z
X
appliance do not climb onto
the appliance.
To avoid damaging the silicon
Z
X
grouting, do not put hot
cookware on the frame.
Do not cut or prepare food
Z
X
on the surface or drop hard
objects onto it. Do not drag
cookware across the surface.
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hobd682r

Table of Contents