Table of Contents
Advertisement
WARNING: If the surface
Z
X
is cracked, switch off the
appliance to avoid the
possibility of electric shock.
Do not switch on a device
Z
X
if the surface is cracked or
there is a damage to the
material thickness.
Do not touch the appliance
Z
X
with wet parts of the body.
To clean the product a steam
Z
X
cleaner is not to be used.
Metallic objects such as
Z
X
knives, forks, spoons and lids
should not be placed on the
hob surface since they can get
hot.
After use, switch off the hob
Z
X
element by its control and do
not rely on the pan detector.
WARNING: Unattended
Z
X
cooking on a hob with fat
or oil can be dangerous and
may result in fire. NEVER
try to extinguish a fire with
water, but switch off the
appliance and then cover
flame e.g. with a lid or a fire
blanket.
CAUTION: The cooking
Z
X
process has to be
supervised. A short term
cooking process has to be
supervised continuously.
The appliance is not intended
Z
X
to be operated by means of
an external timer or separate
remote-control system.
28
WARNING: Danger of fire:
Z
X
do not store items on the
cooking surfaces.
Ensure that the device
Z
X
is installed in a way that
allows to disconnect it from
the power supply, with a
contact opening distance (3
mm) that ensures complete
disconnection in category III
overvoltage conditions.
Ensure that the device is
Z
X
not exposed to atmospheric
agents (rain, sun).
Ensure that the ventilation
Z
X
of the appliance is in
accordance with the
manufacturer's instructions.
Cabinet requirements
The cooking hob is intended
Z
X
to be built into the worktop
above a kitchen cabinet of
600 mm width or more.
If fitting in flammable
Z
X
material, the guidelines and
standards for low voltage
installations and for the fire
protection must be strictly
observed.
For fitted units, the
Z
X
components (plastic
materials and veneered
wood) must be assembled
with heat-resistant adhesives
(min. 100 °C): Unsuitable
materials and adhesives
Advertisement
Table of Contents
