Table of Contents
Advertisement
Available languages
Available languages
Wireless Hotspot
In situations where the projector is out-of-range of a wireless network (for example while on a camping
trip), you can configure the projector to act as a wireless hotspot to create a closed network for
devices to connect directly to the projector via a wireless connection and to project files from their
local storage.
The projector will have no access to the Internet while in wireless hotspot mode.
To create a wireless hotspot:
1. Install the wireless dongle provide into the wireless dongle port (see
on page
8).
2. Power on the projector (see
3. On the home screen of the BenQ Launcher interface, press the down arrow
times to navigate to the Settings menus.
4. Select Settings and press OK.
5. Select Hotspot and press OK.
Slå på projektoren on page
Tillegg: Drift (under startende kilde) for fastvareversjon før v01.00.19.00
Installere den trådløse donglen
22).
key the three
117
Advertisement
Table of Contents
