SETTINGS CONFIGURATION AND MANAGEMENT
Name
VLAN
VLAN ID
SIP DiffServ
Media DiffServ
LLDP
Enable
Country Code
Description
To enable or disable the Virtual Local Area Network (VLAN).
By enabling this option, all communication to and from
Konftel 800 goes through the specified VLAN.
The phone also uses this VLAN to communicate
through the web interface.
To specify the ID number to be used for all IP telephony
communication through VLAN on your phone.
To specify a value in the range from 0 to 63 to prioritize the
SIP messages as part of quality of service (QoS)
mechanism.
You can configure this setting only through the web
interface.
To specify a value in the range from 0 to 63 to prioritize the
media packets (voice) as part of quality of service (QoS)
mechanism.
You can configure this setting only through the web
interface.
To enable and disable specification of the phone location
settings.
Konftel 800 uses Link Layer Discovery Protocol—Media
Endpoint Discovery (LLDP-MED) as a data link protocol to
send information about itself and receive data about other
devices in the same network. You can specify a part of the
parameters if some information is unavailable.
By default, LLDP is enabled after the first boot, factory
reset, and configuration reset.
You can configure LLDP settings only through the web
interface.
To specify the country.
33
Table continued...