Configuring The Ldap Number Attributes Through The Web Interface - Konftel 800 Installation & Administration

SETTINGS CONFIGURATION AND MANAGEMENT
Parameter
Country code
Area code
External prefix
Min length for
external prefix
Exact length for
no external prefix
Number prefix for
no external prefix
If complete information is unavailable, you can configure only the known
parameters.

Configuring the LDAP number attributes through the web interface

You can configure the LDAP number attributes through the web interface of your
Konftel 800.
Log in to the web interface.
Navigate to the
Scroll down to the
Description
To specify the country code where the phone is located. In
case the country code in any phone number attribute is
identical to that code, the phone ignores it.
To specify the area code where the phone is located. In
case the area code in any phone number attribute is
identical to that code, the phone ignores it.
To specify a special prefix for dialing external numbers.
Example: 0 to get a dialing tone in some cases.
To restrict the external prefix that the phone adds only if the
phone number is longer than the minimum length. This
allows to use short internal numbers.
The default setting is 0.
To specify that the phone must not add the external prefix if
the phone number is exactly of the entered length.
The default setting is 0.
To specify the initial number for the phone numbers in case
of using which the phone adds no external prefix. All
numbers that start with this number will not have the
external prefix added. You can use this option if all internal
numbers start with a certain number.
The default setting is 0.
tab.
LDAP
Number attributes
section.
49