Typical Installation (With Fill Valve) - Graco Dyna-Star 24Y408 Instructions, Repair And Parts

Installation
Typical Installation
Systems with Fill Valve in the Refilling Line
The installation shown is only a guide for selecting and installing system components. Contact your Graco distributor
for assistance in planning a system to suit your needs.
NOTE: The remote filling station pump stalls (dead-heads) when the reservoir is full. If the pump does not stall
(dead-head) there is a leak in the system.
F . 7
IG
Key:
D Refilling Line
T Pressure Relief Line
V Instruction Label
Z Fill Valve
Z1 Pressure Relief Knob
NOTE: The components highlighted in F
unique features in a Fill Valve installation. See Typical Installa-
tion on page 7 for a complete list of the other system compo-
nents.
10
V
. 7 identify the
IG
Z
Z1
T
D
 Install the fill valve (Z) in an easily accessible location
between the remote fill station pump (P) and Auto-Fill Shut Off
Valve (S).
The fill valve is used to relieve pressure in the refilling line and
to reset the Auto-Fill Shut Off.
3A3429C