Getting Started; Meter Connection - Geo trio User Manual

Trio . User manual

Getting started

Getting started

Meter connection

Each time the Display is turned on it will show
Connecting to smart
for up to 5 minutes while the Display connects to the smart
meter...
meter(s) in your home.
Should the screen show then you will need to contact
No Network
your energy provider to complete the installation.
If the screen shows Network, then you may need to move the
Lost
Display closer to your smart meter(s) to re-establish the connection.
You can check the strength of the signal to the smart meter(s) by
looking at the and icons in the top left hand corner of the screen
l m
Connection established
Once your Display has successfully established a connection to your
smart meter(s), your Trio will show the current consumption for
electricity and recent gas usage.
If your Display loses connection to the smart meter(s), then it
will show the alert above. Try moving the Trio closer to the smart
meter(s) to re-connect.
9