Prepay; Enable Supply; Top-Up - Geo trio User Manual

Trio . User manual Prepay (prepayment meters only)

Prepay

(prepayment meters only)

Enable supply

On some meters, the electricity supply can be enabled (restored)
from the Trio without having to press a button on the meter. If you
meter supports this capability, it will automatically appear in the
Prepay menu when the supply is ready to be enabled.
Unfortunately, for safety reasons, gas meters cannot be enabled
(restored) from the Trio.

Top-up

The Trio can be used to top-up the meter(s). In the Prepay menu
select Top-up, if both meters are in prepayment mode, then select
the fuel to top-up.
Once the code has been entered and sent, a confirmation screen
will appear.
Once the code has accepted by the meter a confirmation will
appear, including a spoken alert. It may take up to 30 minutes
for the confirmation to appear. If the top-up is rejected the
confirmation will explain why it was rejected.
Please note If you have top-up via another source, then this will
not generate a top-up alert message on your Trio.
20