Online Setup; About The Wifi Module; Installation - Geo trio User Manual

Trio . User manual

Online setup

About the WiFi module

The WiFi module has been provided to plug into your Trio Touch
button display. This will give you access to your energy data within
your energy app.
Compatibility
•
This WiFi Module is compatible with:
•
Trio Touchbutton
It cannot be used on any other Trio.

Installation

What you will need:
•
The Wifi Module
•
A small flat bladed screwdriver
Instructions
If your Trio has been supplied with the optional WiFi module, or you
have received this subsequently, please follow the instructions below
to insert the new module.
Removing the blank plate
1
Make sure the Display is disconnected from the power supply and
any batteries are removed, then remove the panel from the rear of
the display (use a small flat bladed screwdriver and lever up from
the left-hand side gently).
Inserting the WiFi module
2
Take the WiFi module out of its packaging. Make sure the module
is the right way up (see image). When inserting, place the left-hand
side down first, then push down (without excessive force) on the
right-hand side until it clicks into place.
If the WiFi network and menu item is not visible in the
settings menu, then the Wifi Module is not present or
has not been inserted incorrectly.
Connecting your Trio to your App
3
Please follow the instructions in your energy app.
Online setup
30