Settings - HMS Networks Intesis AC Cloud Control Configuration Manual

3.6

Settings

In settings the domain region where the AC Cloud Control device will work can be changed,
also, if the installation has more than device and the user needs to identify which device is
going to be configured it can be called.
Tap on Settings (See
• To identify to which network AC Cloud Control device is connected the mobile or tablet
tap on Identify (See
then it will be off (See
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
Figure 3.18)
Figure 3.18 Settings configuration site.
Figure 3.19). the light of the LED will blink white for 6 seconds,
Figure 3.20).
Figure 3.19 Settings AC Cloud control.
Device Configuration 1.0
URL https://www.intesis.com
21 / 24