HMS Networks Intesis AC Cloud Control Configuration Manual page 22

Blinking
• To change of Region, tap on the region wanted (See
shown telling that if the region is changed the configuration process must be started
from the beginning (See
Tap on save (See
The light of the LED will blink green for 6 seconds, then it will turn steady green (See
Figure 3.22)
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
White
6 sec
Figure 3.20
Figure 3.21). Tap on OK.
Figure 3.19).
Figure 3.21
Green
Blinking
Figure 3.22 Selecting region LED feedback.
OFF
Identify LED feedback.
Figure
Change region.
Green
Steady
<6 sec
Device Configuration 1.0
3.19). A pop-up will be
URL https://www.intesis.com
22 / 24