HMS Networks Intesis AC Cloud Control Configuration Manual page 20

the light of the LED will blink blue, 2 minutes after the WPS button of the router had been
pressed the light of the LED will be off (See
Blue
Blinking
If the configuration network has been carried out successfully the light of the LED will follow
a light sequence (See
In case the light of the LED blinks Magenta (See
beginning.
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
"Click
<2 min
Figure 3.16 Performing WPS configuration LED feedback.
Figure 3.5). To continue tap on done.
Magenta
Blinking
Figure 3.17 Unsuccessful connection LED feedback.
Figure 3.16).
OFF
<2 min
"
Figure 3.17), start the process from the
Device Configuration 1.0
URL https://www.intesis.com
20 / 24