HMS Networks Intesis AC Cloud Control Configuration Manual page 18

• In case to select the security WEP/WAP2 type the SSID of the Wi-Fi network wanted.
Also, type the password Wi-Fi network and to make sure is well entered slide Show
password selector (See
If the configuration network has been carried out successfully the light of the LED will follow
a light sequence (See
In case the light of the LED does not follow the sequence or start lighting different, start the
process from the beginning.
In manual mode is an option for advanced configuration. (See
By default, it comes in option DHCP (See
• In case to select Static IP, type the IP address, Subnet Mask and Getaway. (See
3.13). Tap on Save.
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
Figure 3.11). Tap on Connect.
Figure 3.11 Security WEP/ WPA2.
Figure 3.5). Tap on Done.
Figure
Figure 3.12 Advanced options (DHCP).
Figure 3.13 Advanced options (Static IP).
Figure 3.10
3.12). Tap on Save.
Device Configuration 1.0
and Figure 3.11).
Figure
URL https://www.intesis.com
18 / 24