HMS Networks Intesis AC Cloud Control Configuration Manual page 13

Go to Wi-Fi settings of your mobile or Table and select the network generated by AC Cloud
Control device (See
In case the user is not connected to the device network a pop-up window will be shown asking
to connect to it. (See
The mode to configure the Wi-Fi network can be selected as preference. Further information
about each mode configurations will be found at
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
Figure 3.3). Tap on Next.
Figure 3.4).
Figure 3.3 Configuration network procedure.
Figure 3.4 Configuration network warning pop-up window.
Section 3.3, Section 3.4
Device Configuration 1.0
and Section 3.5.
URL https://www.intesis.com
13 / 24