Led Status Information; Led Status During Wi-Fi Configuration; Led Status During Ir Configuration (Autolearning Mode) - HMS Networks Intesis AC Cloud Control Configuration Manual

4. LED status information

AC Cloud Control device has an external LED which uses to give the user a feedback to
communicate the status of the device.
4.1

LED status during Wi-Fi configuration

LED Color (s)
Blue
Magenta
White
Green
Green
Red
Yellow
Red - Green
Yellow - Green
4.2

LED status during IR configuration (Autolearning mode)

!
LED Color Behavior
White Steady
Green Blinking
Red Blinking
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
Behavior
Blinking Performing WPS connection (up to 2 min)
Blink WPS connection error
Blinking Identifying AC Cloud Control Device
Steady Not configured
Blinking Checking device configuration parameter values (up to 2 min)
Blinking Connecting to access point and server (up to 2 min)
Blinking Downloading configuration. Wait (up to 2 min)
Error Connecting to Access point or router. Try to connect
Alternate blinking
again and make sure you write the correct password.
Server not reached. Check if there is Internet connectivity on
Alternate blinking
your Access Point or router.
Note: The autolearning can be performed just with Universal
AC Cloud Control devices.
Waiting customer pressing the On/Off button of the IR remote controller (up
to 20 seconds)
The IR remote controller has been linked as expected with the AC Cloud
Control device
The IR remote controller has NOT been linked as expected with the AC
Cloud Control device
Description
Description
Device Configuration 1.0
URL https://www.intesis.com
23 / 24