Autolearning - HMS Networks Intesis AC Cloud Control Configuration Manual

2.4

Autolearning

Autolearning mode is used to pair the IR control of the Climatize system with the Universal
AC Cloud Control device.
!
To active the Autolearning mode in the Universal device is needed to hold the button for 4
seconds (See Figure
Once the light is steady withe, press the on/off button of the IR remote of the air conditioner
machine pointing it to the universal device (See
the Universal device recognized the IR remote successfully the light will turn steady green
(See Figure 2.13). Otherwise, it will turn red (See
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
Note: The autolearning can be performed just with Universal
AC Cloud Control devices.
2.10), the light of the LED will be steady white (See
4 sec
Figure 2.10 Autolearning procedure.
White
Steady
Figure 2.11 Autolearning LED feedback.
Figure 2.12), the light of it will blink green. If
Figure 2.14).
Device Configuration 1.0
Figure 2.11).
URL https://www.intesis.com
10 / 24