Led Color Code; Led Color Code During Wi-Fi Configuration; Shortcuts; Reset Wi-Fi Settings Or Enabling Configuration Mode - HMS Networks AC Cloud Control Configuration

5. LED color code

AC Cloud Control uses the LED to provide feedback about its status and possible errors.

LED color code during Wi-Fi configuration

LED Color (s)
Blue
White
Green
Green
Red
Yellow
Red - Green
Yellow - Green

6. Shortcuts

AC Cloud Control's toggle button enables a short and easy configuration or
troubleshooting.

Reset Wi-Fi settings or enabling configuration mode

Press and hold the button for 10 seconds, then release it. The LED will start blinking
green, after 10 seconds it will turn steady green, meaning the process is completed and
the AC Cloud Control is in configuration mode.
10 sec
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
Behavior
Blinking Performing WPS connection (up to 2 min)
Blinking Identifying AC Cloud Control device
Steady Not configured
Blinking Checking device configuration parameter values (up to 2 min)
Blinking Connecting to access point and server (up to 2 min)
Blinking Downloading configuration. Wait (up to 2 min)
Error Connecting to Access point or router. Try to connect
Alternate blinking
again and make sure you write the correct password.
Server not reached. Check if there is Internet connectivity on
Alternate blinking
your Access Point or router.
Green
Blinking
Figure 27.- Reset Wi-Fi settings or enabling configuration mode.
Device Configuration with Bluetooth
Description
Green
Steady
<10 sec
URL https://www.intesis.com
16 / 17