Cleaning And Maintenance - Kalorik WFVC 44452 Manual

• Disconnect the crevice tool and insert the handheld unit back into
the main body. You will hear a "click" sound which confirms that it
has locked into the main body. (Fig.11)
Note: We recommend emptying the dust container after every use.
Please follow the instructions in the "Cleaning & Maintenance" section.

CLEANING AND MAINTENANCE

Always turn off the power and disconnect the plug from the power
outlet before starting any cleaning or maintenance.
HANDHELD UNIT AND MAIN BODY
• Clean the unit using a dry, soft cloth. If necessary, you can slightly
dampen the cloth in a water solution diluted with a little neutral
detergent. Do not use soap powder, detergent and solvents like
thinner, benzene, and spray type cleaners.
• Dry immediately.
• Ensure that there is no water in the nozzle after cleaning the
handheld unit.
• Remove any dirt / dust from the nozzle of handheld unit after each
use.
• Empty the contents into a dust bin. (Fig.12)
• Remove the EPA inner filter by turning the housing in the anti-
clockwise direction. (Fig.13) As indicated below, wash outer filter
with tap water and clean the EPA filter, let it dry completely before
reinserting into the handheld unit. (Fig.14)
Note: The handheld nozzle, EPA filter and outer filter must be hand
washed and are not dishwasher safe.
RESERVOIR DISPOSAL
• Press the chamber release button to eject the chamber. (Fig.15)
• Pull out the reservoir handle and remove.
• Unlock the top lids of the reservoir. (Fig.16)
www.KALORIK.com
16
WFVC 44452 - 180330