Operation; Operation Signals - Kaba C-lever Compact Installation Instructions Manual

Installation instructions
5

Operation

5.1

Operation signals

The acoustic signals may first have to be activated using the Programmer!
Master A/B authorised
(open programming
window)
Add user medium
Delete user medium
Master A/B authorised
(close programming
window)
Authorised medium
Unauthorised medium
Master A/B unauthorised
Delete subgroup with
authorised master
Soft INI reset with A/B
structure with authorised
programming master A or
with B structure with
programming master B
Kaba c-lever compact
Action
1 x short
1 x short
2 x short
1 x long
1 x short
4 x short
1 x long
2 x short
2 x short after
10 secs,
2 x short after
a further 15
secs,
k2evo703en-2011-05
Acoustic Optical
signal signal
1 x green
1 x green
1 x green
1 x green
1 x green
4 x red
1 x red
1 x green
Green light on
presentation
of card, goes
out upon
successful
initialisation
Operation
Confirmation
The acoustic signal sounds if
the medium is taken out of
range of the antenna.
Hold master medium in front
of antenna for approx. 10
seconds.
2 beeps after 10 seconds
confirms the complete reset
of the user media, 2 beeps
after a further 15 seconds
confirms the reset of all
master media.
16