Mounting; Installation Site; Installation On A Din Rail; Figure 9: Snapping Onto The Din Rail - WAGO 852-1411/000-001 Manual

32

Mounting

5 Mounting
5.1

Installation site

The location selected to install the industrial ECO switch may greatly affect its
performance. When selecting a site, we recommend considering the following
rules:
• Install the industrial ECO switch at an appropriate place. See section
"Device Description" > ... > "Technical Data" for the acceptable
temperature and humidity operating ranges.
Make sure that the heat output from the industrial ECO switch and ventilation
around it is adequate. Do not place any objects on the industrial ECO switch.
5.2

Installation on a DIN Rail

The industrial ECO switch must be grounded through the grounding screw and
the DIN rail.
Grounding the switch
Grounding the Industrial ECO switch prevents electromagnetic interference due
to electromagnetic interference. Please refer to the corresponding standards for
EMC-compliant installations.
Place the industrial ECO switch onto the DIN rail from the top and snap it into
position.

Figure 9: Snapping onto the DIN Rail

Manual
Version 1.0.0
WAGO ETHERNET Accessories 852
852-1411/000-001 Industrial Eco Switch