Special Use Conditions For Ethernet Devices - WAGO 852-1411/000-001 Manual

14 Important Notes
2.3

Special Use Conditions for ETHERNET Devices

If not otherwise specified, ETHERNET devices are intended for use on local
networks. Please note the following when using ETHERNET devices in your
system:
• Do not connect control components and control networks directly to an
open network such as the Internet or an office network. WAGO
recommends putting control components and control networks behind a
firewall.
• Limit physical and electronic access to all automation components to
authorized personnel only.
• Change the default passwords before first use! This will reduce the risk of
unauthorized access to your system.
• Regularly change the passwords used! This will reduce the risk of
unauthorized access to your system.
• If remote access to control components and control networks is required,
use a Virtual Private Network (VPN).
• Regularly perform threat analyses. You can check whether the measures
taken meet your security requirements.
• Use "defense-in-depth" mechanisms in your system's security configuration
to restrict the access to and control of individual products and networks.
Manual
Version 1.0.0
WAGO ETHERNET Accessories 852
852-1411/000-001 Industrial Eco Switch