Table of Contents
Advertisement
4.
Open inner water tank and pour out the unused water. Turn the main body to right
and water tank to left to open. Attach the inner water tank back to the main body.
5.
Turn on the flosser and keep it idle for 5 seconds to drain the residual water from
the main body.
6.
Push back the inner water tank.
Note: Do not push or pull the water tank when using and if there is water
inside.
Checking Battery Volume
1.
When the product is in standby, long-press the Mode button to show the battery
volume.
2.
If the battery volume is above 75%, all mode lights will be bright.
3.
If the battery volume is 50% -75%, Soft, Pulse, DIY mode lights will be bright.
4.
If the battery volume is 25%-50%, Pulse DIY mode lights will be bright.
5.
If the battery volume is below 25%, only DIY mode light will be bright.
Advertisement
Table of Contents
