Cleaning And Care - Kogan KACRDWFLBKA User Manual

CLEANING & CARE
•
Never immerse the entire flosser into any liquid.
•
Unplug the power cord before cleaning.
Water Tank
•
The water tank can be washed with soapy water or placed on the top dish rack of
the dishwasher.
•
Always drain and dry the water in the tank before exposing it to a freezing
environment.
•
Remove the dirt with a brush or similar item and then clean it with a cloth.
•
When the water tank is not used for a long time, clean it well before using it again.
Jet Tips
•
Press the Jet Tip Lock/Unlock button to remove the jet tip. Clean it with water and
wipe it with a cloth.
•
It is recommended to replace the new jet tip every 3 months. Otherwise, the jet tip
will become too large to effectively clean the teeth.
• Following jet tips available from Kogan.com can be used as a replacement:
o
For the Cordless Advanced Water Flosser – Black (KACRDWFLBKA), use
KACDWFBKR4A.
o
For the Cordless Advanced Water Flosser – White (KACRDWFLWHA),
use KACDWFWHR4A.
Main Body
Remove the dirt with a dampened cloth and a mild detergent. Then wipe it with a dry cloth.
If it is very dirty, it can be washed with water.
• Do not use alcohol, benzene, thinner, etc to wipe the product.
• Do not wash with hot water above 50°C.
•
Wipe off the water after cleaning suction pipe.
•
Wipe with a cloth after cleaning.
•
Do not bend the suction pipe. Otherwise, it may stop water absorption while the
flosser is working.
• Clean the filter net of the suction pipe in time to prevent clogging. Water Tank
Cover.
•
Remove the dirt, otherwise it will cause water leakage.