Ethernet; System Connection - Kaba 90 40 Technical Manual

Construction and function
4.2.2

Ethernet

4.3

System connection

14
Normal operation
In normal operation, the LEDs signal the device status with regard to the IP address,
the wireless components and the software.
LED Status
Off
On
Flashing
Off
Off
On
Flashing slowly
Flashing quickly
Flashes 2x (10 s)
On or off
On (30 s)
Off (1 s)
The two additional LEDs by the Ethernet port indicate the status of the Ethernet in-
terface.
LED Status
Yellow Off
On
Green On
On/flashes
The wireless gateway acts as an interface between the host system and evolo com-
ponents equipped with the wireless option. The wireless gateway does not manage
access control itself. It receives the relevant configuration for the connected wireless
components from the host system and transfers this information to the wireless com-
ponents.
Data exchange with the host system takes place via Ethernet, whilst data exchange
with the wireless components takes place via radio.
Service functions such as network settings, firmware updates and certain wireless
commissioning functions can be performed via the inbuilt service interface.
04045088 - 11/2016
Meaning
IP address is not assigned
IP address is assigned
Default IP address is active (172.16.99.98)
Reserved for future functions
No wireless components connected to the wireless
gateway
At least one wireless component is connected to the
wireless gateway
Wireless commissioning active
Range measurement active
Range measurement could not be started
Software error
Software is running
Boot process is complete
Meaning
No network link
Network link
No data transfer
Data transfer
Technical Manual
Kaba wireless gateway 90 40