Technical Data; System; Interfaces; Power Supply - Kaba 90 40 Technical Manual

Product description
3.2

Technical data

3.2.1

System

3.2.2

Interfaces

3.2.3

Power supply

10
• ARM926 processor, 454 MHz system frequency
• NAND flash memory: 256 MB
• RAM: 128 MB
• Linux operating system
Ethernet
• 10BASE-T/100BASE-TX Autosensing, Auto MDI-X in line with IEEE standard 802.3
• PoE in line with IEEE standard 802.3af
• Connection type: 8P8C (RJ45)
Radio
• Radio interface in line with IEEE standard 802.15.4 for connection of evolo com-
ponents equipped with the wireless option
• Frequency: 2.4‒2.4855 GHz
• Number of channels: 16
• Transmission power: +8 dBm
• Receiver sensitivity: -102 dBm
• Data rate: 250 kbit/s
• Range: approx. 30 metres (depending on conditions on-site)
USB
• USB 2.0 (type A) for additional connectivity
The wireless gateway is powered via PoE (Power over Ethernet) or alternatively via an
external power supply (not included in the scope of delivery).
• Power consumption: typically 1.2 W, max. 2.5 W
• PoE in line with IEEE standard 802.3af
Power supply via external power supply unit
A suitable external power supply unit provides:
• Output voltage: 5 V DC ± 0.4 V DC
• Output current: ≥ 800 mA
The barrel connector of a suitable power supply unit corresponds to:
Polarity
Diameter
Do not power the wireless gateway via PoE and via an external power supply simul-
taneously. Doing so can damage the device.
04045088 - 11/2016
Outside Inside
−
5.5 mm 2.1 mm
Technical Manual
+
Kaba wireless gateway 90 40