Page 2
This document must not be reproduced in any way or otherwise further used without the written consent of Kaba AG. All product names are trademarks of the respective companies. Copyright 2016 Kaba AG. All rights reserved. 04045088 - 11/2016...
About this document About this document Validity This document describes the product: Product designation: Kaba wireless gateway 90 40 Manufacturing date: from November 2015 Firmware version: from 3.0.0 This document describes all product versions and all optional features and functions.
Abbreviations/Definition of terms In order to make it easier to read the document, the following brief descriptions have been used: Product designation Short designation Kaba wireless gateway 90 40 wireless gateway Kaba digital cylinder, wireless option wireless component Kaba c-lever, wireless option...
Accessories and spare parts Accessories and spare parts must meet the manufacturer's technical specifications. This is guaranteed with Kaba original accessories and spare parts. Kaba wireless gateway 90 40 04045088 - 11/2016...
Damage can still occur due to static electricity on clothing. • Only transport and ship removed modules in ESD-shielding, conductive protect- ive containers. 04045088 - 11/2016 Kaba wireless gateway 90 40...
Product description Product description Overview The Kaba wireless gateway 90 40 acts as an interface between the host system and Kaba evolo components equipped with the wireless option. The wireless gateway supports the connection of up to 16 wireless components via its IEEE 802.15.4-compliant radio interface.
The barrel connector of a suitable power supply unit corresponds to: Outside Inside − Polarity 5.5 mm 2.1 mm Diameter Do not power the wireless gateway via PoE and via an external power supply simul- taneously. Doing so can damage the device. 04045088 - 11/2016 Kaba wireless gateway 90 40...
Wireless MAC address (EUI-64) • Ethernet MAC address (EUI-48) • Hardware version number • Connection data (supply voltage) • CE mark • WEEE mark in accordance with German industrial standard EN 50419 04045088 - 11/2016 Kaba wireless gateway 90 40...
The triggering of a reset is signalled by the status LEDs. Status Phase Flickers Reset triggered Flashes 2x Kernel is shutting down Boot loader is starting Start of boot process, see above Kaba wireless gateway 90 40 04045088 - 11/2016...
Data exchange with the host system takes place via Ethernet, whilst data exchange with the wireless components takes place via radio. Service functions such as network settings, firmware updates and certain wireless commissioning functions can be performed via the inbuilt service interface. 04045088 - 11/2016 Kaba wireless gateway 90 40...
(b) a user is logged in to the service interface of the wireless gateway. Wireless Site Survey Tool The tool offers further options for measuring the range. See wireless site survey tool quick guide and wireless planning guideline. Kaba wireless gateway 90 40 04045088 - 11/2016...
The housing is to be fastened to the wall with the appropriate fastening material (screws/dowels). For wall mounting, it should be taken into consideration that the network cable and, if necessary, the power supply lead have enough space on the top of the device. Kaba wireless gateway 90 40 04045088 - 11/2016...
2. Localise the wireless gateway as a UPnP device in the computer's network envir- onment. 3. Search for the localised device's IP address. ð The device can be found in the Ethernet network using the IP address. 04045088 - 11/2016 Kaba wireless gateway 90 40...
Page 19
This completes the process of commissioning the wireless gateway itself. Additional steps required, such as the wireless commissioning of wireless components, are car- ried out via the host system. Some changes can also be made via the wireless gateway's service interface [} 6.2]. Kaba wireless gateway 90 40 04045088 - 11/2016...
Write permission reader kabagateway Restricted read permission 6.2.2 Basic structure After successfully logging in, the service functions are available. Select the requested function from the main menu on the left. 04045088 - 11/2016 Kaba wireless gateway 90 40...
Change passwords for users admin and reader. About device Gateway information Information on the device's hardware and firmware and the wireless MAC address (EUI-64). System update Importing firmware to update the wireless gateway. Kaba wireless gateway 90 40 04045088 - 11/2016...
• '02Branchmanager/Door 2' is connected to the wire- less gateway via the wireless extender '1stFloor, X1.1' • '03Finance/Door 3' is connected to the wireless gate- way via the wireless extender '1stFloor, X1.4' 04045088 - 11/2016 Kaba wireless gateway 90 40...
3. Activate wireless commissioning. ð The device looks for wireless extenders or wireless components. 4. Wait until the wireless extenders or wireless components are displayed under Available devices, i.e. are connected. 5. Deactivate wireless commissioning. Kaba wireless gateway 90 40 04045088 - 11/2016...
If a wireless component is connected with the gateway via a wireless extender, then the RSSI value of this wireless component indicates the sig- nal strength of the wireless extender. 04045088 - 11/2016 Kaba wireless gateway 90 40...
Page 25
Function call: Menu > Wireless components > Details > Identify The function triggers signals (LED and audible signals) on the selected wireless com- ponent for 30 seconds. This clearly identifies the wireless components. Kaba wireless gateway 90 40 04045088 - 11/2016...
Page 26
It can take up to 60 minutes for the firmware to be transferred. ð The service interface reports whether the update was successful. The wireless gateway supports the parallel update of several wireless components. 04045088 - 11/2016 Kaba wireless gateway 90 40...
Displays the manufacturer if the wireless extender has the information. Application version The version number of the wireless extender's application layer. Hardware version Displays the hardware version number if the wireless extender has the information at its disposal. Kaba wireless gateway 90 40 04045088 - 11/2016...
Function call: Menu > Wireless extenders > Details > Disconnect The function disconnects the selected wireless extender from the secured wireless network. 6.2.8 Events Function call: Menu > Events Information on events (only for specialist personnel). 04045088 - 11/2016 Kaba wireless gateway 90 40...
To guarantee the accessibility of the wireless gateway, the device reverts to its de- fault IP address if there is no DHCP server in the network or if the DHCP server does not respond. The device signals [} 4.2.1] the activation of the default IP address. Kaba wireless gateway 90 40 04045088 - 11/2016...
The installation code is generated by the host system and transmitted to the wireless gateway. The installation code can be manually entered in the field New installation code. 04045088 - 11/2016 Kaba wireless gateway 90 40...
Update the firmware of wireless components If the firmware was imported to the wireless gateway, carry out an update for each wireless component [} 6.2.6.1] under Menu > Wireless components > Details. Kaba wireless gateway 90 40 04045088 - 11/2016...
Change password Function call: Settings > Change password Kaba recommends changing the passwords of saved users. [} 6.2.1] Communication between the host system and the wireless gateway is also pass- word-protected. This password is separate from the passwords for users of the wire- less gateway service interface.
The connection to the host system, wireless components and, if necessary, wireless extenders, needs to be re-established [} 7.1.2]. A downgrade of the firmware for the wireless gateway may only be performed in consultation with Support. Kaba wireless gateway 90 40 04045088 - 11/2016...
Page 34
F' The firmware and ZigBee versions are inconsistent. Access to the service interface and communication with the host system are blocked. Send the device in for repair [see Chapter 8]. 04045088 - 11/2016 Kaba wireless gateway 90 40...
Restoring the factory settings on the wireless gateway does not reset the settings of the host system. • In order to re-establish a connection to the reset wireless gateway, perform commissioning again. [} 6.1] Kaba wireless gateway 90 40 04045088 - 11/2016...
In the event of a power failure and following a restart, it must be ensured that the wireless gateway is receiving time information from the host system and/or the NTP server. 04045088 - 11/2016 Kaba wireless gateway 90 40...
When sending Kaba products, please observe the following notes. Kaba is not liable for damage to products caused by inadequate packaging. Complete devices The original packaging is specially designed for the device. It offers the best possible protection against damage during transport.
Reason for return, e.g. repair exchange. • Accurate description of fault. Returns from countries outside the EU also require a customs invoice with an accur- ate customs value. In some countries (e.g. Switzerland) a preference is required. 04045088 - 11/2016 Kaba wireless gateway 90 40...
Disposal in Germany: Once the supplied goods can no longer be used, Kaba GmbH will dispose of them correctly in accordance with the legal regulations (Electrical and Electronic Equip- ment Act in Germany). Transport costs incurred by the manufacturer are to be borne by the owner of the old electronic device.