Advertisement
PV-ezRack SolarRoof Isolator Shade
Contents
1
Introduction ............................................................................................. 1
2
Tools & Components ................................................................................ 2
3
System overview ..................................................................................... 3
4
Installation Instructions ........................................................................... 4
1/10 Duerdin Street, Clayton VIC 3168 Australia
Tel: +61 3 9239 8088 Fax: +61 3 9239 8024
E-mail: sales@clenergy.com.au www.clenergy.com.au
Installation Guide
NO.: PZ15-IM02-10
Advertisement
Table of Contents
Related Manuals for Clenergy PV-ezRack SolarRoof IS-SR265/111
Summary of Contents for Clenergy PV-ezRack SolarRoof IS-SR265/111
- Page 1 Installation Guide NO.: PZ15-IM02-10 Contents Introduction ..................... 1 Tools & Components ................2 System overview ..................3 Installation Instructions ................4 1/10 Duerdin Street, Clayton VIC 3168 Australia Tel: +61 3 9239 8088 Fax: +61 3 9239 8024 E-mail: sales@clenergy.com.au www.clenergy.com.au...
- Page 2 1. Introduction Clenergy PV-ezRack SolarRoof Isolator Shade is the latest accessory for roof- top PV-mounting system. With full-covering bracket design and our patented Z- Module technology, our Isolator Shade is easily installed along the Rail and provides full covering for the Isolator.
- Page 3 2.1 Tools Screw Driver Screw Driver Marker ( for M8 Hexagon Torque Wrench (6mm） Socket Screw) Note: the tools above are not included in Clenergy’s supply scope. 2.2 Components IS-SR265/111/B IS-SR265/111 Isolator Shade, Black Isolator Shade anodized 2/ 4 1/10 Duerdin Street, Clayton VIC 3168 Australia Tel: +61 3 9239 8088 Fax: +61 3 9239 8024 E-mail: sales@clenergy.com.au www.clenergy.com.au...
- Page 4 （4）Avoid using electric tools for final tightening （5）Avoid working at high temperatures 3.2.3 Safe Torques Please refer to safe torques defined in this guide. 3/ 4 1/10 Duerdin Street, Clayton VIC 3168 Australia Tel: +61 3 9239 8088 Fax: +61 3 9239 8024 E-mail: sales@clenergy.com.au www.clenergy.com.au...
- Page 5 Recommended torque is 4-5 Nm. - The completed installation with the mounted Isolator is shown in the figure on the right. 4/ 4 1/10 Duerdin Street, Clayton VIC 3168 Australia Tel: +61 3 9239 8088 Fax: +61 3 9239 8024 E-mail: sales@clenergy.com.au www.clenergy.com.au...
Need help?
Do you have a question about the PV-ezRack SolarRoof IS-SR265/111 and is the answer not in the manual?
Questions and answers