Configuration - Smtp Settings - Huawei RH2488 V2 Server BMC User Manual

RH2488 V2 BMC
User Guide
1.
2.
3.
Be sure to close all Java sessions before changing floppy emulation to avoid unexpected
errors.
2.4.9 Configuration - SMTP Settings
This feature allows the user to configure SMTP (Simple Mail Transfer Protocol) settings for
email transmission through the network. When you click SMTP in the Options window, the
following screen will display.
Issue 04 (2014-09-15)
Remote Session
Virtual Media Attach Mode: Click the pull-down menu to display virtual media attach
modes.
−
Attach: Select this mode to activate a virtual media to make it available for remote
access. A virtual device will always be seen in the system BIOS even when it is not
active.
−
Auto Attach (Default): Select this mode to automatically enable virtual media support
and make it available for remote access. Virtual devices will only be shown in the
operating systems and BIOS when a device or an ISO image is connected through the
virtual media wizard.
−
Detach: Select this mode to disable virtual media for remote access.
Floppy Emulation: Click the pull-down menu to see the following:
Off (Default): Select this item to disable floppy emulation when you wish to connect
−
the USB Flash drive via virtual media redirection.
On: Select this item to enable floppy emulation when you wish to connect a floppy
−
drive or floppy ISO image through virtual media redirection.
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
2 Configuring the IPMI Settings
20