Table of Contents
Advertisement
RH2488 V2 BMC
User Guide
2.
3.
4.
2.6 Maintenance
2.6.1 Maintenance page
Use this feature to manage and configure IPMI devices. Follow the instructions below to
configure Maintenance settings.
1.
2.
3.
Issue 04 (2014-09-15)
Click Server Power Control to display the Power Control submenu as shown above.
Power Control and Status: This submenu indicates the status and the current power
control settings of the remote server. The status of the remote server are displayed as
below:
−
Reset Server: Click this radio button to reset the power control settings for the remote
server.
−
Power Off Server - Immediately: Click this radio button to immediately power off the
remote server.
−
Power Off Server - Orderly Shutdown: Click this radio button to power off and shut
down the remote server in an orderly manner.
−
Power On Server: Click this radio button to power on the remote server.
−
Power Cycle Server: Click this radio button to power cycle the remote server.
Perform Action: fter selecting a power setting from the list above, click this item to
execute the command and perform the action.
Click Maintenance in the Menu bar to display the Maintenance page.
Click Firmware Update to update the BMC firmware (the BIOS) of the remote server.
You can also press Unit Reset to reboot the BMC (IPMI) Controller.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
2 Configuring the IPMI Settings
33
Advertisement
Table of Contents
