Table of Contents
Advertisement
RH2488 V2 BMC
User Guide
Figure 2-1 Advanced menu
Enabling All Onboard USB ports
Step 1 Press the Del key at bootup to enter the BIOS Setup Utility.
Step 2 Select Advanced and press Enter to enter the Advanced menu.
Step 3 Select Advanced Chipset Control and press Enter.
Step 4 From the Advanced Chipset Control submenu, select South Bridge Control and press Enter.
Step 5 Make sure that all onboard USB ports are enabled (highlighted). If not, Select USB Functions
and press Enabled or select the number of onboard USB ports and press Enter to enable all
onboard USB ports, see Figure 2-2.
----End
Issue 04 (2014-09-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
2 Configuring the IPMI Settings
2
Advertisement
Table of Contents
