System Information - Janome Quilt Maker Pro 18 VERSA Service Manual

System Information Screen
(A) The Lifetime stitch counter counts the number of
stitches the machine has performed. The Lifetime
count is the total number of stitches made since
the machine was built. The Lifetime counter cannot
be reset and should be used as an indicator to
determine when general machine maintenance
should be performed by an authorized Janome
Retailer .
(B) The foot controller icon in the middle of the screen
indicates whether the foot controller is attached. A
red "X" will appear if it is not connected properly.
(C) The left and right sensor icons indicate whether
the sensors are functioning. A red "X" will appear if
sensors are not functioning properly.
(D) Information contained in the white boxes at the
bottom of the screen identifies the electronics board
revision numbers as well as the firmware revision
numbers of the Quilt Maker Pro 18 Versa machine
the display version, and the sensor version.
Press the Home button to return to the Main menu
screen or the Tools button to return to the Diagnostics
menu screen .
Page 50
C
A
B
D
Quit Maker Pro 18 VERSA