Table of Contents
Advertisement
3. Lubrication
Use
Lube #1 (Red)
and the shaft. Then use
support at each of the seven places.
Apply one drop of
Lube #6
raceway of the bobbin case support two to
three times per day. This application is based
upon sewing for eight hours of machine time.
If the machine is used less, lubricate the
hook less frequently. After the lubrication
of the hook, it is recommended that one
momentarily sew on scrap material before
resuming the sewing of the quilt. Failure to do
so may result in oil stains on the quilt .
Page 10
in the seven places shown below, on each side of the shaft between the bearing
Lube #2 (Blue)
between the bearing outer diameter and the bearing
(Purple), to the
Quit Maker Pro 18 VERSA
Advertisement
Table of Contents
