Table of Contents
Advertisement
Motion Sensors
This test checks the movement of the fabric across
the sensors for the stitch regulation.
Needle Sensor Test
The Needle Sensor test will indicate whether the nee dle
position sensor is functioning properly. Rotating the hand
wheel should result in a beep for a third of a stitch cycle
followed by no beep for the other two-thirds.
If you hear a constant beep or no beep at all for a full
360° rotation of the hand wheel, this indicates a failed
test and the machine should be inspected by a quali fied
Janome repair technician .
Janome-America.com
The machine will beep as fabric is moved
across the sensors.
If there is no beep check the cable
connection.
The values below will help a technician
determine the quality of the sensor data
when fabric is on the sensors.
39017
37191
Rotate the hand wheel.
Passing Test:
Solid beep for 1/3 of a stitch cycle, no
beep for the rest of the cycle.
Failing Test:
No beep or solid beep as you rotate the
hand wheel one full rotation.
Page 47
Advertisement
Table of Contents
