Table of Contents
Advertisement
Storage space and interior equipment ›
Remove fastening element and insert
The fastening element prevents the cargo from slip-
ping.
The fastening element is attached to the partition on
the variable loading floor.
The maximum load for the fastening element is
10 kg.
Move the fastening element
Partition with fastening element in the luggage compartment
›
To remove, pull the se-
curing tabs upwards
and outwards and re-
move the partition.
›
To insert engage the
partition in the fixing
points
or
.
A
B
›
To insert, position the
fastening element in an
oblique direction on
the partition and press
downwards.
›
Removing takes place
in reverse order.
Unlocking
1
Moving
2
Applying
3
Partition with fastening element in the
luggage compartment
Through-loading bag
Insert and lock
In the bag, a max. of 4 pairs of skis with poles can be
transported.
›
Fold the rear armrest and the cover in the seat
backrest downwards.
›
Place the empty bag in the opening in such a way
that the end of the bag with the zip is in the boot.
›
Place the skis with the tips facing to the front and
the poles with the tips facing to the rear into the
bag and close the bag.
›
Guide the securing strap B through the opening
around the upper part of the seat backrest.
›
Fold the seat backrests back until the locking but-
ton clicks into place.
›
Insert the securing strap into the lock until it clicks
into place.
167
The maximum load for
the partition is 10 kg.
The maximum load for
the fastening element is
10 kg.
›
Tighten the strap A
around the skis in front
of the bindings.
›
Fold the seat backrest
a little forward.
Advertisement
Table of Contents
