Table of Contents
Advertisement
164 Storage space and interior equipment ›
Removing and inserting
Removing
›
Remove the boot cover.
›
Take out the folded pocket in an upwards direc-
tion.
Inserting
Version 1
Version 2
Stowing the pocket under the variable loading
floor
›
Remove the variable loading floor.
Or:
›
Unfold the variable loading floor in the upper posi-
tion and lift it in the rear area.
Net partition
›
Put the end of the strip
on the holder
.
A
B
›
Proceed in the same
way on the left side.
›
Insert the end of the
strip marked with
in-
to the right-hand
mount and the end of
the strip marked
with
into the left-
hand mount.
›
Insert the pocket into
the recesses of the
side partitions.
If the multifunction
pocket and the roll-up
cover are stowed at
the same time, the roll-
up cover at the front
must cover the multi-
function pocket.
Net partition
Attach the net partition
Unfolding/folding
The folded mesh partition can be stowed under
the variable loading floor.
Attach at the back
›
Remove the roll-up cover or fold up the rear seat
backrests.
›
First insert the crossbar into the mount
side and push it forwards.
›
Fix the bar in the same way on the other side.
›
Snap the carabiners
into the lashing eyes.
B
›
Pull the straps firmly at the free ends
Fasten in the front
The procedure is analogous to the process behind.
The lashing eyes for the carabiner are located under
the central body pillars.
Releasing
Loosening takes place in the reverse order to fixing.
›
Open the arms of the
cross bar until you hear
the locking button au-
dibly click into place.
›
Press the safety button
and fold the arms of
the crossbar together.
on one
A
.
C
Advertisement
Table of Contents
