Network Setup 2 Options - EFI Fiery X3eTY2 Configuration And Setup

S F X3 TY2 C T P 30
ETTING UP THE IERY E FROM THE OPIER OUCH ANEL

Network Setup 2 options

With Network Setup 2, you configure the Fiery X3eTY2 for WINS and Web Services.
Use WINS Name Server
WINS Disabled/Auto/Custom [Auto]
Broadcasts from SMB devices cannot pass across a router without a WINS name server.
Setting up the WINS name server is outside the scope of this document. To find out if a name
server is available, contact your network administrator.
Enabling Windows Printing enables Server Message Block (SMB), the file and printer sharing
protocol built into Windows. Enabling SMB allows the Fiery X3eTY2 to be listed on the
network so that Windows clients can print to a particular print connection (Hold, Print, or
Direct) on the Fiery X3eTY2 without any other networking software. For information about
setting up a Windows computer for Windows printing, see Printing from Windows and your
Windows documentation. Windows printing runs via TCP/IP, so you must configure TCP/IP
on the Fiery X3eTY2 and on all computers that use Windows printing.
If you select Auto, the Fiery X3eTY2 obtains the IP address for the WINS server
automatically. If you choose Custom, you can enter the IP address manually in the following
option.
WINS IP Address
[127.0.0.1]
Change the default address to the correct IP address for the WINS Name Server. Obtain the
correct address from your network administrator.
Set Domain Name
Name
Enter the name of the workgroup or domain.
Enable Web Services
Enable/Disable [Enable]
Select Yes to make the WebTools available to users. TCP/IP must be enabled on the
Fiery X3eTY2 and on user computers. A Java-enabled Web browser and a valid IP address or
DNS host name are required for each user computer. For information about browser and
computer requirements, see Welcome.