U-Line H-1128 Assembly

H-1128, H-1135
π
H-1136, H-1137
H-1138, H-3657
PACKING TABLES
LEGS AND FRAME ASSEMBLY
1. Insert adjustable feet (1) into legs (2) and slide into
place at desired height.
NOTE: If desired, insert locking tabs through
legs and adjustable feet to lock feet into place.
2. Place legs (2) in upright position. Legs should be
placed approximately 41" apart for 48" units, 53"
apart for 60" units and 65" apart for 72" units.
3. Attach stringer (3) to table legs using center 4 holes
in back legs. Fasten with 8 bolts, washers and nuts.
4. Place lower shelf (4) across braces of legs. Attach
lower shelf using 4 nuts and bolts.
5. To attach tabletop (5) to frame assembly, place
tabletop on a smooth, non-marring surface with top
side facing down.
6. Rotate the assembled frame upside down and line
up with the pre-drilled holes on the bottom side of
the top.
PAGE 1 OF 2
1-800-295-5510
uline.com
ASSEMBLY
# DESCRIPTION
1 Adjustable Feet
2 Legs
3 Stringer
4 Lower Shelf
5 Tabletop
¼" - 20 x ⁄" Bolts
¼" - 20 Nuts
Lock Washers
#14 - ¾" Wood Screws
Locking Tabs
2
4
QTY
4
2
1
1
1
12
12
12
16
4
5
3
1
0513 IH-1128