Table of Contents
Advertisement
7.0
Installing a finger float into a ground or surface water chamber
Care must be taken to ensure the correct type of float switch is installed into the chamber. The AlertMaxx
is sold either with a finger float or pendant float. The finger float must only be used for ground water
applications and the pendant float must only be used for foul water applications.
1.
Using the nut and washers provided, secure the finger float to the inside of the float housing so that the
float rises with rising water levels (see figure 2).
2.
Using the two cable ties provided, attach the float housing to the discharge arm so it is 300mm from the
base of the chamber (see figure 3).
80
Figure 2. Ground Water Float Switch
For technical support, please call 01279 757400
Figure 3. Ground Water Sump (DMS-164)
AlertMaxx
300mm
7
Advertisement
Table of Contents
