Table of Contents
Advertisement
AlertMaxx
10.0 Connecting a pendant float to the AlertMaxx unit
1.
Using a draw cord, pull the float cable through the cable duct on the chamber.
2.
Insert a large cable gland into the second from right hole of the AlertMaxx unit.
3.
Pull the float cable through the large cable gland on the AlertMaxx unit.
4.
Connect the black and a blue cable from the float switch cable to the terminal strip (see figure 7).
The brown cable should be disregarded and isolated.
If the cable supplied with the float switch is too short, the cable can be extended using a cable with a
10
PLEASE NOTE
minimum core cross sectional area of 1mm².
BLACK
BLUE
Figure 7. Wiring a pendant float switch
L
N
For technical support, please call 01279 757400
E
BLUE
BROWN
Advertisement
Table of Contents
