Table of Contents
Advertisement
3.0
Technical information
Size (without cable glands)
Weight
Mains Supply
Internal Battery
Alarm Sound Level
Visual Display
Operating temperature
Approximate Installation time
4.0
Unit location
The AlertMaxx must be positioned in an area where the alarm can be clearly heard and is permanently
accessible.
The AlertMaxx unit is not waterproof and must be installed indoors or inside a kiosk.
5.0
Mounting the AlertMaxx unit
1.
Using the template provided on page 15 of this instruction manual (figure 1), mark the fixing
positions on the wall.
2.
Drill the two holes and fit suitable wall plugs (ensure correct wall plugs are used for the wall type).
3.
Remove the screws from the front of the unit that secure the front fascia.
4.
Secure the AlertMaxx unit to the wall using appropriate screws.
When securing the unit to the wall, avoid over tightening the screws as this may cause the box to crack.
For technical support, please call 01279 757400
AlertMaxx Specification
W: 115mm x D: 95mm x H: 60mm
650g
200-250V AC (50Hz)
Pb 6V - 1.2Ah
81db
Red, Blue, Green LED
5-35°C
30 minutes
CAUTION!
PLEASE NOTE
AlertMaxx
5
Advertisement
Table of Contents
