Revision History Doc. PKG Version Description Release Date Contributor Version V1.0 1.2.0.4 Release 2023/08/01 Aaron.Lin Symbols and Statements Provides important messages or advices that INFORMATION might help prevent Inconvenient or problem situations. Notices. Provide guidance or advices that are NOTE related to the functional integrity of the machine.
Table of Contents Revision History ......................1 Description ......................3 Support Model ...................... 3 Installation ......................3 How to install ......................4 User Interface ......................4 Live View ....................... 5 Live View Page Link ....................7 Manual Calibration ....................7 Configuration ......................
1. Description Occupancy alarm service is an on-edge service for VIVOITEK smart counter (SC9133/SC9133-RTL) for space occupancy monitoring. With this VADP package, user can setup an on-edge server for accumulating counting data from each entrance for occupancy calculation. Result can be display through web portal or access by API and it can trigger alarm for user-defined occupancy level.
Live View The live view portal display the occupancy level with current number and allowed number. User can define crowded and full level in the configuration. The live view page will show the real-time data and change the indication bar with different color and predefined info.
Live View Page Link http://{OAS_Server_IP}/OAS/www/index.html#/occupancyAlarm/live User can use a browser to display the occupancy by linking to this live view page and show in fullscreen. INFORMATION If user want to use an Android-based smart device like smart TV or Android TB box to display the occupancy monitor.
4. Configuration Capability Setting Crowded Level Description Note Allowed Define the allowed number for Occupancy this space. The occupancy limit will display on live view. Once reaching the threshold, an “OccupancyFull” alarm trigger will be announce through VADP event trigger. Crowded Define the crowded number for this space.
Reset Schedule Description Enable the daily “Reset schedule” and set the reset time. The occupancy number will be reset at the specific schedule. NOTE For the occupancy alarm trigger, please refer Ch.5 for detail explanation. Network Setting Function Add new smart counter into pool Delete selected device from pool Save all the changes Device Connection Status...
Page 12
Depend on the IN/OUT definition of each rule, user can set the “Reverse” option on the list for reverse IN/OUT for occupancy accumulation. It’s also common to use the “Reverse” option for different side of the entrance. User can add the same rule into an occupancy alarm of SPACE B by simple enable the reverse option.
5. Occupancy Alarm Trigger After install the “occupancy alarm service” VADP package, the service will create two event triggers, “OccupancyFull” & OccupancyCrrowded” automatically. “Configuration” > “Event” > “Event settings” >“Add” a new event Configure the event > “Set VADP Trigger” Add “OccypancyFull”...
6. API Table http://{IP}/Occupancy/State get the current number & status {"number":28,"state":"Full"} http://{IP}/Occupancy/DetailState Get the detail of occupancy. 1. Individual Device: In/Out number, rule name, and its source camera IP 2. Summary Data: In/Out number, manual offset, and current status. {"Detail":[{"in":12,"ip":"10.66.108.13","out":0,"port":80,"rule":"Line1"},{"in":5,"i p":"10.66.106.105","out":8,"port":80,"rule":"Rule- 1"}],"in":17,"number":9,"offset":0,"out":8,"state":"Crowded"} http://{IP}/Occupancy/Offset?Add=<Num>...