Table of Contents
Advertisement
AlertMaxx
6.0
Connecting mains power to the AlertMaxx unit
1.
Insert a large cable gland into the far right hole of the AlertMaxx unit.
2.
Feed the mains power cable through the right hand cable gland (large) and connect the power cable
to the terminal strip (see figure 2).
Ensure mains power is isolated before connecting it to the AlertMaxx unit.
80
Finger float
Move to section 7.0
6
BLACK
BLUE
WARNING!
PLEASE NOTE
If you have a finger float, move to section 7.0
If you have a pendant float, move to section 9.0
L
N
Figure 2. Connecting mains
Pendant float
Move to section 9.0
For technical support, please call 01279 757400
E
BLUE
BROWN
Advertisement
Table of Contents
