Mounting Hardware - Honeywell FF-SYA14 Series Manual

Figure 3-19 Right-Angle Mounting
Mechanical guardings
Receiver 2

3.9 Mounting Hardware

FF-SYA Series light curtains are designed with an easy to use T-slot mounting system. Two standard mounting brackets are
delivered together with the light curtain including the necessary mounting accessories (bolts, nuts, and washers) to mount one
emitter or one receiver unit.
ELECTRICAL SHOCK
Properly ground FF-SYA Series light curtain housing by connecting earth ground through the connector.
Failure to comply with these instructions could result in death or serious injury.
To mount one complete light curtain system, use two pairs of brackets, one for the emitter and one for the receiver. The emitter
and receiver may require different types of mounting brackets based on application requirements.
OPERATION UNDER HIGH VIBRATIONS
In case of high vibrations, an additional pair of brackets (total 3 pairs) must be used for light curtain systems with protection
heights greater or equal to 1000 mm to maintain correct alignment (see chapter Order Guide).
30
107031-33-EN FR26 GLO 1101 Printed in France