Advertisement
Safety precautions
To avoid the possibility of causing injury to users or damage to properties, please follow all the explanations written below.
• The following symbols differentiate the levels of danger and injury that may result if the product is improperly used.
This symbol indicates that improper handling may cause a risk of death or serious injury.
WARNING
CAUTION
This symbol indicates that improper handling may cause a risk of injury or damage to properties.
• The following symbols indicate type of instructions to be observed. (The symbols given below are examples.)
This symbol denotes an action
that is PROHIBITED.
WARNING
Never try to take apart, repair or modify this product.
Ignition or abnormal operation may occur, and cause electric shock, fire or injury.
• Contact the dealer for repairing this product.
Do not use more than the rating of the electrical outlet or wiring accessories.
Do not connect this product to power supply except rated voltage and rated
frequency.
If you exceed the rating using a power strip etc., heat generation may occur and cause fire.
When a failure or malfunction occurs, stop using the product immediately
and disconnect the power plug.
Heat generation etc. may occur and cause electric shock or
[Examples of failure/malfunction]
• Abnormal noise is observed during operation.
• Moving the power cord stops operation.
• Burning smell is observed.
• Motor unit, power cord or plug becomes abnormally hot.
Contact the dealer immediately for maintenance/repairing.
Do not turn on the product unless blade, guard and louver are installed properly.
It may cause injury.
Do not damage the power cord or plug.
(Do not cut, modify. Do not forcefully bend, twist or pull. Do not put near heating appliances,
or put anything heavy on. Do not bundle.)
If damaged power cord or plug is used, short circuit etc. may occur and cause electric shock or
• Contact the dealer for repairing the power cord or plug.
If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
Make sure the power plug is fully inserted into socket.
Loose engagement of the plug and socket may cause electric shock or fire due to overheat.
• Do not use the damaged plug or loosen socket.
Do not connect or disconnect the power plug with wet hands.
It may cause electric shock.
Always follow these instructions
This symbol denotes
a COMPULSORY action.
fire.
This symbol denotes an action
that should be carefully performed.
fire.
Advertisement
