Connect The Devices To Your Wi-Fi Network; Connect Grohe Sense Guard - Grohe Sense User Manual

2. GETTING STARTED

2.2. CONNECT THE DEVICES TO YOUR WI-FI NETWORK

2.2.1. CONNECT GROHE SENSE GUARD

To connect GROHE Sense Guard to your home's Wi-Fi network, follow these steps in the
GROHE Sense app:
1. Tap the (+) button in the bottom part of the screen to start adding a new device.
2. Select the device type: GROHE Sense Guard.
3. Select one of the 3 options suitable to your case:
• Recommended: Start the planning phase of the installation guide by tapping the
button "Next".
• If planning is already done: Continue with your personal planning ID from the
personal installation guide by tapping the button "Use planning ID".
• For experts only: Continue without a planning ID by tapping the button
"Connect now".
4. Enter a name for your device, and assign it to a house and a room in the house.
If you haven't created a house or a room yet, you will be automatically requested.
Tap the button "Next".
1
10 10
2
5. Activate your device for Wi-Fi integration according to the instructions on
the screen.
• Plug in GROHE Sense Guard, wait a moment, and then press the "CONNECTION"
button. The device starts flashing blue and the connection button light changes from
orange to blue. The device remains available for Wi-Fi connection for 10 minutes.
• If your device does not start flashing blue, it is not ready for Wi-Fi integration.
Try to reset the device.
3 4
GROHE SENSE USER GUIDE
5
11 11